辊道报价-圣霖国际(在线咨询)-辊道

空转辊道——通常借助轧件重力来推动，所以辊道之平面多做成与水平面之间有斜度，以利用重力作用，因此又称为重力辊道。一般小型轧机的辊道，特别是升降台上的辊道，尽可采用重力辊道而不必采用转动辊道。有些工作辊道的延长部分也有采用重力辊道的。

The idle roller table is usually driven by the gr***ity of the rolled piece， so the plane of the roller table is made of a gradient between the horizontal plane and the horizontal plane，辊道， so as to make use of the gr***ity effect， so it is also called the gr***ity roller table. The rolling mill of a ***all mill，圣霖国际辊道， especially the roller table on the lift table，辊道厂家， can use the gr***ity roller without using the rotating roller table. Some of the lengthening parts of the working rollers also use the gr***itational roller.

辊道是轧钢车间运送轧件的主要设备，其重量占整个轧钢车间设备总重量的40%左右，是轧钢车间中使用***多的设备。轧件进出加热炉，在轧机上往复轧制及轧后输送到精整工序等工作均由辊道来完成。

Roller table is the main equipment for rolling parts in rolling workshop. Its weight accounts for about 40% of the total weight of the whole rolling workshop. It is the most used equipment in rolling workshop. Rolling in and out of the heating furnace， the rolling mill on the rolling mill and after rolling to the finishing process and other work are completed by the roller.

出坯辊道是切割区辊道之后至冷床之前的辊道，由若干辊子组成，快速将切割后的定火铸坯输送至横移区辊道。

紧接着出坯辊道的是横移区辊道，辊道报价，该区辊道接受出坯辊道来的铸坯，将铸坯输送至固定挡板之前，由横移机构将每流铸坯输送到冷床或其他区域。

The billet is before and after cutting roller roller roller and cooling bed， of a plurality of rollers， the rapid fire set after cutting billet conveying roller to tr***erse.

Then a blank roller is tr***ersing roller， the roller roller to accept a billet， billet before delivery to the fixed baffle， by tr***ersing mechani*** each flow casting billet transporting to the bed or other areas.