轧辊-圣霖国际【顾客至上】-轧辊设备

轧辊由辊身、辊颈和轴头二部分组成。辊颈安装在轴承中，轧辊报价，并通过袖承座和压下装置把轧制力传给机架。铂头和连接轴相连接，传递轧制扭矩。轴头有三种主要形式；梅花轴头、万向轴头、带键槽的或圆柱形轴头。

The roll is of two parts of the roller body， the neck of the roll and the shaft head. The roll neck is installed in the bearing and passes through the sleeve bearing seat and the press down device to the rack. The platinum head is connected to the connecting shaft to transfer the rolling torque. There are three main forms of the shaft; the shaft of a plum，轧辊， a universal shaft，轧辊设备， or a cylindrical shaft with a keyway.

轧辊的品种和制造工艺随冶金技术的进步和轧钢设备的演变而不断发展。中世纪轧制软的有色金属时使用强度低的灰铸铁轧辊。18世纪中叶英国掌握了轧制钢板用的冷硬铸铁轧辊的生产技术。

The variety and manufacturing process of roll h***e been developed with the progress of metallurgical technology and the evolution of steel rolling equipment. The use of low strength gray iron rolls in the Middle Ages when rolling soft nonferrous metals. In the middle of the eighteenth Century，轧辊厂家， Britain mastered the production technology of cold cast iron rolls used for rolling steel plates.

被轧制的钢种

被轧制的钢种是选择轧辊的关键因素，其抗变形能力随坯料化学成分不同而改变，主要表现在轧制的各阶段变形的负荷大小和变化。必须根据确定的强度和硬度选择轧辊。

Rolled steel

The rolled steel is the key factor to select the roll. Its deformation resistance varies with the chemical of the billet. It is mainly manifested in the load and change of deformation in each rolling stage. The roll must be selected according to the determined strength and hardness.

轧辊-圣霖国际【顾客至上】-轧辊设备由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）坚持“以人为本”的企业理念，拥有一支技术过硬的员工***，力求提供好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。圣霖国际——您可信赖的朋友，公司地址：辽宁省鞍山市高新区越岭路256号（研发中心A座2号楼510室至511室），联系人：王秋。