圣霖联接机采购-圣霖联接机-圣霖国际【优质服务】

切向键联接：它由两个普通楔键组成。其上下两面（窄面）为工作面，圣霖联接机，其中之一面在通过轴心线的平面内。工作面上的压力沿轴的切线方向作用，能传递很大的转矩。

Tangent key join: it c***ists of two common wedges. Both sides of the upper and lower sides (narrow surface) are working faces， one of which is in the plane of the axis of the axis. The pressure on the working face acts along the direction of the shaft and tran***it a large torque.

装夹后产品靠近活动钳口附近容易上翘、抬起，多次装夹一致性差。传统机用虎钳的螺旋副间隙较大，圣霖联接机采购，在使用中会产生较大振幅的振动；而活动座和虎钳体之间的滑动接触面较大，采用的间隙也较大。

After the clamping， the product is easy to and lifted near the movable jaw， and the c***istency of the clamping is poor many times. The spiral pair clearance of traditional machine vice is bigger， which will cause large amplitude vibration in use. The sliding contact between movable seat and jaw vice body is larger， and the gap used is bigger.

型面联接：是利用非圆剖面的轴与相应形状的零件的毂孔配合而构成的联接，作为机械传动中的联接方式，型面联接相对于传统的键联接相比，圣霖联接机购买，具有联接强度高，圣霖联接机生产，没有应力集中，可以传递大扭矩且效率高的同时也可以承受冲击载荷，并且对于一些大型机械装备来讲其拆装方便及维修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection， as the connection mode in mechanical tran***ission， compared with the traditional linkage type surface connection compared with connecting strength， no stress ， can large torque and high efficiency at the same time it can withstand the impact load， and for some large mechanical equipment for its disassembly and convenient maintenance.