圣霖国际联接机购买优选企业

我们聊聊在机械设计中，我们必须掌握的有关轴毂联接的知识！轴毂联接是轴毂与轴相连接的轴上零件，常见齿轮、带轮等。联接使回转零件在轴上***和固定，以便传递运动和动力。

We talk about the mechanical design, we must master the knowledge about the shaft hub connection. Shaft hub connection is the axle hub and shaft connected to the shaft parts, common gear, belt wheel, and so on. The connection enables the rotating parts to be and fixed on the axis to tran***it motion and power.

与平键联接比较，花键联接在强度、工艺和使用方面有下列特点：在轴上与毂孔上直接而均匀地制出较多的齿与槽，故联接受力较为均匀；因槽较浅，齿根处应力集中较小，轴与毂的强度削弱较少。

Compared with the flat bond connection, the spline connection has the following characteristics in strength, process and use.More teeth and grooves are made directly and evenly on the shaft and hub hole, so the joint force is more uniform.

Because of the shallow groove, the stress at the root of the tooth is ***all, and the strength of the shaft and hub is weakened less.

机用虎钳结构缺点及使用中的隐患。机用虎钳有结构简单、夹紧力大、操作和维护方便等特点。但由于其必须具有广泛的适用性和操作的便捷性，其螺母与丝杆之间、活动座与虎钳体之间存在着较大的配合间隙，导致在装夹一些加工精度要求较高的产品时难以达到要求。

The structural shortcomings of the machine vise and the hidden danger in the use. The machine tool has the characteristics of simple structure, large clamping force, easy operation and maintenance. But because of its wide applicability and convenient operation, there is a large gap between the nut and the screw rod, the movable seat and the vice body, which results in the difficulty of meeting some requirements when clamping some products with high machining accuracy.