圣霖国际冷床信息推荐,圣霖国际【用心服务】

该冷床设备主要用于轧后钢板在线缓慢自然冷却。在型材生产线上，冷床对型材还具有预弯曲功能，防止型材在自然冷却过程中因各处质量不等导致出现不规则弯曲。应用领域：冷床主要应用在钢铁行业、冶金行业等。

With the cooling bed equipment is mainly used for rolling steel platesonline slow natural cooling. Profile production line has the function of cooling bed pre bending profiles, prevent profiles in the natural cooling process of the entire qualityranging from lead to irregular bending. Application: bed is mainly used in the iron and steel industry, metallurgical industry, etc.

轧件在冷床冷却过程中由于冷却水不能均匀分布在型钢表面，头部冷却速度较快，***弯曲，形成浴盆状，使腹板上的积水不能流出，导致上表面收缩率明显大于型钢下表面，产生上弯。

为消除不均匀变形，首先应该使2辊压下量足够大，满足型钢塑变要求。消除型钢原有变形，达到统一的变形的目的。

Rolling in bed cooling process due to the cooling water can not be uniformly distributed on the surface of steel, the head of the fast cooling rate, the first bend forming tub shaped, make web water can not flow, resulting in the surface shrinkage rate was significantly higher than that of the steel surface, due to bending.

In order to eliminate the uneven deformation, first of all, the 2 roller should be large enough to meet the requirement of the type of steel plastic change. The original deformation of the steel has reached the goal of uniform deformation.

在钢铁工业生产过程中，消耗能源推动物料转变的同时会产生大量的余能，如何有效回收利用这些余能已成为钢铁业实现节能减排的重要途径之一。

In the process of iron and steel production, a large amount of residual energy will be produced while energy c***umption is driven by energy, and how to effectively recycle these residual energy has become one of the important ways for the iron and steel industry to achieve energy s***ing and emission reduction.