圣霖国际轧辊来电咨询

轧辊产生弹性压扁时可能轧制的板厚。冷轧辊探伤标准中通常把辊身依受力情况分成表面区、中心区和中间区，然后依断裂力学原理分别规定各区允许存在的缺陷的临界尺寸。在一定轧机上轧制一定的产品时，随着板带的逐渐变薄，压下越来越困难。当板带薄至某一限度后，不管如何旋紧压下螺丝或加大液压压下的压力，不管反复轧制多少道，由于轧辊产生弹性压扁而不可能再使产品变薄。这一极限厚度称为可轧厚度。

The ***allest plate thickness may be rolled when the roll produces elastic squash. When a certain product is rolled on a certain rolling mill, with the gradual thinning of the strip, it is becoming more and more difficult to press down. When the strip is thin to a certain limit, no matter how to tighten down the screw or increase the pressure of hydraulic pressure, no matter how many rolls are repeatedly rolled, it is for the product to become thin due to the elastic flattening of the roll. This limit thickness is called the minimum rolling thickness.

不同类型的轧机以及同类型而使用条件不同的轧机，对所用的轧辊性能要求不尽雷同，如方坯和板坯初轧机轧辊要具有好的扭转和弯曲强度、韧性、咬入性、抗热裂性和热冲击性以及耐磨性；而热带精轧机架要求轧辊辊面的高硬度、抗压痕、耐磨、抗剥落和耐热裂等性能。Nondestructivetestingofrollsisusuallycarriedoutbyultrasonicflawdetectors。

Different types of rolling mill and the same type and the use of different conditi*** on properties of roll mill, requirements for not identical, such as billet and slab mill roll with good torsional and bending strength, toughness, bite, thermal cracking resistance and thermal shock resistance and abrasion resistance; tropical finishing stand requirements the roller surface hardness, wear resistance, spalling resistance, indentation resistance and thermal cracking performance.

轧辊在制作和运用前的预备工序中会发生剩余应力和热应力。运用时又进一步遭到了各种周期应力的效果,包含有曲折、改变、剪力、接触应力和热应力等。

Residual stresses and thermal stresses will occur in the preparatory process before making and applying rolls. When applied, it is further affected by various cyclic stresses, including twists, changes, shear forces, contact stresses and thermal stresses.