fastener报价诚信企业

五金冲压件应用领域

汽车行业的冲压。以拉深为主。在我国这部份主要集中在汽车厂、拖拉机厂、飞机制造厂等大厂，***的大型冲压拉深厂还未几见。

Application field of metal stamping parts

Stamping in the automobile industry. It is dominated by deep drawing. In China, this part is mainly conceated in automobile factories, tractor factories, aircraft manufactory and so on. Independent large stamping and drawing plants are not yet seen.

管材的锯削：选用细齿锯条，当管壁锯透后随即将管子沿着推锯方向转动一个适当角度，再继续锯割，依次转动，直至将管子锯断。锯割时管子必须夹正。

Cutting of pipe: select a fine toothed saw blade, when the tube wall is sawed through a proper angle along the direction of the push saw, then continue sawing and turn, until the pipe is sawed. When sawing is cut, the pipe must be clamped.

深缝：锯削深缝时即当锯缝的深度超过锯弓高度时，高度时，锯弓就会与工具相碰，无法继续锯削；此时应将锯条拆出，将锯条转90。

Deep seam: when sawing deep seams, when the depth of the sawblade exceeds the height of the saw bow, when the height is high, the saw bow is touched by the tool and can not continue to be sawed; the saw strip should be removed and the saw blade is turned 90.