圣霖国际联接机生产-圣霖国际联接机-圣霖国际【客户至上】

型面联接：是利用非圆剖面的轴与相应形状的零件的毂孔配合而构成的联接，作为机械传动中的联接方式，型面联接相对于传统的键联接相比，具有联接强度高，圣霖国际联接机生产，没有应力集中，可以传递大扭矩且效率高的同时也可以承受冲击载荷，圣霖国际联接机，并且对于一些大型机械装备来讲其拆装方便及维修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection，圣霖国际联接机选购， as the connection mode in mechanical tran***ission， compared with the traditional linkage type surface connection compared with connecting strength， no stress ， can large torque and high efficiency at the same time it can withstand the impact load， and for some large mechanical equipment for its disassembly and convenient maintenance.

键是一种标准件，通常用于联接轴与轴上旋转零件与摆动零件，起周向固定零件的作用以传递旋转运动和扭矩，楔键还可以起单向轴向固定零件。而导键、滑键、花键还可用作轴上移动的导向装置。 根据键的结构形式，键联接可分为平键联接、半圆键联接、楔键联接和切向键联接等几类。

The key is a standard part， which is usually used to connect the rotating parts and swing parts of the shaft and the axle to move the fixed parts to tran***it rotary motion and torque， and the wedge key can also play a one-way axial fixation part. The guide， slippery key and the spline can also be used as a guiding device for moving on the axis. According to the structure of the key， key joins can be divided into a flat bond， a semicircle bond， a wedge bond and a tangent bond.

楔键联接：键的上下两表面是工作面，键的上表面和轮毂键槽底面均有1∶100的斜度，装配后，键即楔紧在轴和轮毂的键槽里，圣霖国际联接机报价，工作表面产生很大预紧力。

Wedge key connection: the upper and lower two surfaces of the key are the working faces. The upper surface of the key and the bottom of the hub keyway h***e 1 to 100 slope. After assembly， the key is wedged tightly in the keyway of the shaft and hub， and the working surface has a large pre tightening force.