轧辊采购-圣霖国际【精益求精】-轧辊

19世纪下半叶欧洲炼钢技术的进步要求轧制更大吨位的钢锭，无论是灰铸铁或冷硬铸铁轧辊的强度均已不能满足要求。含碳量为0.4%～0.6%普通铸钢轧辊相应诞生。重型锻压设备的出现更使这种成分的锻造轧辊的强韧性得到进一步提高。

In the second half of the nineteenth Century， the progress of steelmaking technology in Europe requires larger tonnage steel ingots to be rolled. Neither the strength of gray iron or chilled cast iron rolls can meet the requirements. The ordinary cast steel roll with a carbon content of 0.4% to 0.6% is born accordingly. The emergence of he***y forging equipment makes the strength and toughness of the forging roll of this component further improved.

(1)软辊；肖氏硬度约为30一40，轧辊，用于开坯机、大型型钢轧机的租轧机等。

(2)半硬辊：肖氏硬度约为40一60，用于大型、中型、小型型钢轧机和钢板轮机的租轧机。

(3)硬面辊：肖氏硬度约为60一85，用于薄板、中板、中型型钢和小型型钢轧机的稿轧机及四辊轧机的支撑辊。

(4)特硬辊le氏硬度约为85—100，用于冷轧机。

(1) soft roll; the hardness of Shaw is about 30 40. It is used for the renting rolling mill of the billet machine and the large steel mill.

(2) semi hard roll: the hardness of the Shaw is about 40 to 60. It is used for the renting rolling mill of large， medium，轧辊设备， ***all type steel mill and steel plate turbine.

(3) hard roll: Shore hardness of about 60 to 85， for supporting roller mill release sheet，轧辊采购， plate， medium and ***all steel mill and four roller mill.

(4) the hardness of the hard roll Le is about 85 - 100 for cold rolling mill.

既避免机械加工，又无补焊热应力热影响，修正厚度也不受***，一起产品所具有的耐磨性及金属材料不具备的退让性，确保修正部位的接触协作。

Not only to ***oid mechanical processing， but also to weld hot stress and heat， the correction thickness is not bound， and the wear resistance of a product and the non - concession of metal materials are not ***ailable， so as to ensure a hundred percent contact and cooperation of the corrected parts.