减速机设备-减速机-圣霖国际【用心服务】

减速机性能特点

1，产品采用模块化设计，电动机输入，输入轴和孔类型三个方面，并配置脚，法兰安装，适用于各种有效的减变速传动，可以直接取代无级调速，减速机哪家有，摆线。

2、能源消耗低、噪音低、振动小，减速机效率高达96%。

3，使用特殊的宽带宽压力电动机，当加载在20 hz - 60赫兹频率范围内正常使用。

4、齿轮渗碳淬火热处理工艺，采用独特的低噪声齿齿形设计，减速机设备，确保产品的使用寿命。

Performance characteristics of reducer

1， the product adopts modular design， motor input，减速机， input shaft and hole type three aspects， and equipped with feet， flange installation， suitable for all kinds of effective variable speed tran***ission， which can directly replace stepless speed regulation and cycloidal.

2， the energy c***umption is low， the noise is low， the vibration is ***all， and the efficiency of the reducer is up to 96%.

3， the use of a special wide band wide pressure motor when loaded in the range of 20 Hz - 60 Hz is normally used.

4， gear carburizing and quenching heat treatment process， using a unique low noise tooth profile design to ensure the service life of the product.

在安装时，减速机哪家好，严禁用铁锤等击打，防止轴向力或径向力过大损坏轴承或齿轮。一定要将安装螺栓旋紧之后再旋紧紧力螺栓。

At the time of installation， it is strictly prohibited to use a hammer， such as a hammer， so as to prevent the axial or radial force from damaging the bearing or gear. It is necessary to tighten the bolt when the bolt is tightened.

减速机内部齿面硬度 随着齿轮硬齿面技术的发展，其承载能力大、体积小、重量轻、传动精度高等特点使其应用领域日趋广泛。但为获得硬齿面采用的渗碳淬硬使齿轮产生变形，导致齿 轮传动噪声增大，寿命缩短。

With the development of hard tooth surface technology， the internal hardness of gear reducer has been widely used because of its large bearing capacity， ***all volume， light weight and high tran***ission accuracy. But the carburizing and hardening used to obtain the hard tooth surface causes the deformation of the gear， which results in the increase of the noise of the gear tran***ission and the shortening of the service life.

减速机设备-减速机-圣霖国际【用心服务】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）坚持“以人为本”的企业理念，拥有一支技术过硬的员工***，力求提供好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。圣霖国际——您可信赖的朋友，公司地址：辽宁省鞍山市高新区越岭路256号（研发中心A座2号楼510室至511室），联系人：王秋。