辊道生产服务为先,圣霖国际优质服务

为使铸坯平稳迅速地运送，有时将这个区的辊道设计成可升降的。辊道按驱动方式可分为集中传动辊道和单独传动辊道两种。集中传动辊道由一台电机带动一组辊子，通过电机一减速机一链轮传动，或者通过电机一减速机～长轴一伞齿轮传动方式传动。

In order to deliver the billet ***oothly and quickly, the roller table in this area is sometimes designed to be lifted and lifted. The roller table can be divided into two types: the drive roller and the separate drive roller. The driven roller table is driven by a motor to a set of rollers, driven by a motor, a reducer or a sprocket, or through a motor, a reducer, a long shaft and a bevel gear tran***ission mode.

支柱一般采用型钢焊接而成，上部用螺栓与支架连接，下部用地脚螺栓与地坪固定。按用途支柱可分为对接支柱和中间支柱，两标准段支架之间采用对接支柱支承，其余（包括端部）则采用中间支柱支承。支柱的设计一般按受压柱的稳定性来控制。

The pillar is usually welded by the steel type steel, the upper part is connected with the bolt and the support, and the bottom is fixed with the ground bolt and the floor.to the use pillar, it can be divided into the docking pillar and the middle pillar. The two bracket is supported by the docking pillar, while the rest (including the ends) is supported by the intermediate support. The design of the pillar is generally by the stability of the compression column.

双层滚筒输送机同样也具备了滚筒的优点。具有输送量大，维护方便等原因。应用于各行业的成品包装箱、周转箱等输送。要求被输送物的底部是平整的。而且每三只滚筒要与底部接触。

Double drum conveyor also has the advantages of drum. It has a large amount of transportation, convenient maintenance and so on. It is applied to the transportation of finished packing boxes and turnover boxes in various industries. The bottom of the conveyer is required to be flat. And every three rollers should be in contact with the bottom.