丹东850rolling mill服务放心可靠 圣霖国际客户

驱动电机斜置在锯机底座上，通过伞齿轮及主传动轴带动锯片，锯片由液压装置锁紧在传动轴上。锯片进锯由液压驱动，进锯速度根据锯切阻力由比例阀调节。当轧件断面较大、锯切阻力高时，进锯速度慢，反之，进锯速度块。

The driving motor is inclined on the base of the saw machine, and the saw blade is driven through the bevel gear and the main drive shaft, and the saw blade is locked on the drive shaft by the hydraulic device. The sawing saw is driven by hydraulic pressure, and the speed of the saw is adjusted by the proportional valve according to the cutting resistance. When the section of the rolled piece is large and the cutting resistance is high, the speed of the saw is slow, and conversely, the speed block of the saw.

据说在14世纪欧洲就有轧机，但有记载的是1480年意大利人达·芬奇（Leonardo da Vinci）设计出轧机的草图。1553年法国人布律列尔(Brulier)轧制出金和银板材,用以制造钱币。此后在西班牙、比利时和英国相继出现轧机。

It is said that there are rolling mills in Europe in the fourteenth Century, but it is recorded that in 1480, Leonardo Da Vinci (Italian Italian designer Da Finch) designed the draft for rolling mills. In 1553 the French law Adler cloth (Brulier) rolled gold and silver plate, used in the manufacture of coins. Since then, rolling mills h***e been rolled out in Spain, Belgium and Britain.

轧机***厂家介绍，在热轧机运行的过程中，关于其的温度控制系统主要包括两个部分，分别为可逆轧机温度控制系统以及连轧机温度控制系统。

In the process of rolling mill, the temperature system of the hot rolling mill mainly includes two parts, which are the temperature system of the reversible rolling mill and the temperature system of the continuous rolling mill.