reducer厂商诚信商家「多图」

减速机内部齿轮的齿距和压力角 小齿距能保证有较多的轮齿同时接触，齿轮重叠增多，减少单个齿轮挠曲，降低传动噪声，提高传动精度。较小的压力角由于齿轮接触角和横六角空心砖模具向重叠比都比较大，因此运转噪声小、精度高。

The tooth distance of the gear in the reducer and the ***all pitch of the pressure angle can ensure that there are more teeth at the same time, the overlap of the gear is increased, the deflection of the single gear is reduced, the tran***ission noise is reduced, and the tran***ission precision is improved. The ***aller pressure angle is due to the larger contact ratio between the gear contact angle and the six corners of the hollow brick mold, so the running noise is ***all and the accuracy is high.

齿轮声辐射特征分析 在选择用不同结构形式的齿轮时，对其特定结构建立声辐射模型，进行动力学分析，对齿轮传动系统噪声进行预先评估。以便根据使用者的不同要求（使用场所，是 否无人操作，是否在城区内，地上、地下建筑物有无特定要求，是否有噪声防护，或无其他特定要求）去满足。在原动机和工作机或执行机构之间起匹配转速和传递转矩的作用，在现代机械中应用极为广泛。

The acoustic radiation characteristic analysis of gear in the selection of gear with different structure forms, set up the acoustic radiation model to its specific structure, carry on the dynamic analysis, and evaluate the gear tran***ission system noise in advance. In order to meet the users' requirements (use sites, unmanned operati***, whether there are specific requirements in the urban area, ground or underground buildings, noise protection, or other specific requirements).

减速机内部齿轮齿形修整（修缘和修根）和齿顶倒角 将齿顶的齿形切削成比正确的渐开曲线略呈凸形。当齿轮齿面受外力产生变形时，可以避免对与之啮合的齿轮产生干涉，并且可以降低噪音，延长齿轮寿命。

The internal gear of the reducer is trimmed (trim and trim) and tooth top chamfering to make the tooth shape of the tooth top convex than the correct involute curve. When the gear tooth surface is deformed by external force, it can ***oid interference to the gears engaged with it, and can reduce noise and prolong the service life of gears.