铁岭forging厂商服务放心可靠“本信息长期有效”

锻造设备种类很多，按照工作部分运行方式不同，锻造设备可分为直线往复运动和相对旋转运动两大类。直线往复锻造设备1、动载撞击的锻造设备2、动静载联合的锻造设备3，***能冲击的锻造设备。

There are many kinds of forging equipment. According to the different operation modes of the working part, the forging equipment can be divided into two categories: straight reciprocating motion and relative rotation motion.

Linear reciprocating forging equipment

1, forging equipment with dynamic load impact

2, forging equipment combined with static and static load

3, high efficiency impacting forging equipment

自由锻造的设备分为锻锤和液压机两大类。生产中使用的锻锤有空气锤和蒸汽-空气锤，有些厂还使用结构简单，***少的弹簧锤、夹板锤、杠杆锤和钢丝锤等。

The equipment of free forging can be divided into two categories: forging hammer and hydraulic press. The forging hammers used in production are air hammer and steam-air hammer. Some factories also use spring hammer, splint hammer, lever hammer and steel wire hammer with simple structure and low investment.

镦粗主要有以下形式：

完全镦粗。完全镦粗是将坯料竖直放在砧面上， 在上砧的锤击下， 使坯料产生高度减小，横截面积增大的塑性变形。

Upsetting mainly includes the following forms:

Full upsetting. Complete upsetting is to place the blank vertically on the anvil surface, hammering on the anvil, so that the height of the blank decreases, the cross-sectional area increases plastic deformation.