圣霖联接机采购服务为先

花键联接由内花键和外花键组成。内、外花键均为多齿零件，在内圆柱表面上的花键为内花键，在外圆柱表面上的花键为外花键。显然，花键联接是平键联接在数目上的发展。

The connection of the spline is made up of the inner and outer spline. The inner and outer spline are multi tooth parts, and the spline on the surface of the inner cylinder is the inner spline, and the spline on the outer cylindrical surface is the outer spline. It is that the spline connection is the development of the number of flat bond connecti.

胜过机用虎钳的柔性虎钳，在装夹中能有效防止工件的翻转、倾斜，克服了机用虎钳因配合间隙大导致工件受力不均、加工发颤等现象；解决了现有轻型、精密工件加工时装夹不可靠的问题。

Flexible than vice machine vise, the clamping can effectively prevent the workpiece turning and tilt, overcome the machine vise for clearance to workpiece uneven stress, etc. to solve the phenomenon of processing tremble; the existing light and precision workpiece clamping reliability of the fashion。

装夹后产品靠近活动钳口附近容易上翘、抬起，多次装夹一致性差。传统机用虎钳的螺旋副间隙较大，在使用中会产生较大振幅的振动；而活动座和虎钳体之间的滑动接触面较大，采用的间隙也较大。

After the clamping, the product is easy to and lifted near the movable jaw, and the cistency of the clamping is poor many times. The spiral pair clearance of traditional machine vice is bigger, which will cause large amplitude vibration in use. The sliding contact between movable seat and jaw vice body is larger, and the gap used is bigger.

装夹过程及工作原理。钳台底座在设备工作台上固定好后，先调整可调钳口座在钳体底座上的位置，确保装夹行程内能有效对工件进行装夹；再将待加工产品置于柔性虎钳的两个钳口之间。

Clamping process and working principle. When the clamping platform is fixed on the equipment worktable, the of the adjustable jaw seat on the base of the clamp body is adjusted first, so as to ensure that the workpiece can be clamped effectively in the clamping stroke, and then the processed product is placed between the two jaw openings of the flexible vice.