圣霖国际辊道询问报价「在线咨询」

特别是输出辊道，过去多采用上述方法对中，但是近有把辊距缩小的倾向，因而采用后一种斜辊布置方式的辊道正在减少。这是为了在轧制薄规格的带钢时避免使带钢在辊道上因终轧速度高而造成折叠。此外，对于辊道的速度和辊子直径也要充分考虑好。

In particular, the output roller table used to use the above methods in the past, but recently there is a tendency to narrow the distance between rolls. Therefore, the roller table with the latter one is decreasing. to ***oid folding the strip on a thin strip of strip to ***oid the high finishing speed of the strip on the roller. In addition, the speed of the roller and the diameter of the roller should be fully cidered.

主要工作辊道紧靠工作机架，它将轧件喂入轧机和接受轧出轧件，因此它是经常参加工作的辊道，故称主要工作辊道。

轧件长度超过主要工作辊道时，由另一组工作辊道参加工作，这一组辊道叫辅助工作辊道，或称为延伸辊道。

The main work table is close to the work rack. It will feed the rolling piece into the rolling mill and accept rolling and rolling parts. Therefore, it is a roller table that often works. So it is called the main work roller table.

When the length of the rolled piece exceeds the main work roller Road, another group of working rollers is involved in the work. This group of rolls is called the auxiliary work roller, or the extension roller.

为使铸坯平稳迅速地运送，有时将这个区的辊道设计成可升降的。辊道按驱动方式可分为集中传动辊道和单独传动辊道两种。集中传动辊道由一台电机带动一组辊子，通过电机一减速机一链轮传动，或者通过电机一减速机～长轴一伞齿轮传动方式传动。

In order to deliver the billet ***oothly and quickly, the roller table in this area is sometimes designed to be lifted and lifted. The roller table can be divided into two types: the drive roller and the separate drive roller. The driven roller table is driven by a motor to a set of rollers, driven by a motor, a reducer or a sprocket, or through a motor, a reducer, a long shaft and a bevel gear tran***ission mode.