圣霖国际吊车轨厂推荐「在线咨询」

修正精度高，涂层厚度从几微米到几毫米，可对金属工件呈现磨损、划伤、、裂纹、破损变形、硬度降低、损害等缺点进行堆积、封孔、补对等修正功用，只须打磨、抛光，也可进行车、铣、 刨、磨等各类机械加工，以及电镀等后期加工。

The thickness of the coating is high, and the thickness of the coating is from several micr*** to a few millimeters. It can be worn, scratched, pinholes, cracks, breakage and deformation, hardness reduction, damage and other shortcomings to accumulate, seal, and compensate for the defects, such as grinding, polishing, milling, milling, grinding and other kinds of mechanical processing, as well as electroplating later processing.

线材轧机拥有粗轧机架和与小型型材轧机类似的中间机架。与两线轧制的小型型材轧机相比，这些轧机一般被设计成可以进行高达4线的同时轧制的切分轧制。然而，目前的发展趋势是采用单线的高速轧制。

The wire mill has a roughing mill stand and an intermediate rack similar to a ***all section mill. Compared with the two section rolling mill, these mills are generally designed for rolling up to 4 lines at the same time. However, the current development trend is single line high-speed rolling.

被轧制的钢种

被轧制的钢种是选择轧辊的关键因素，其抗变形能力随坯料化学成分不同而改变，主要表现在轧制的各阶段变形的负荷大小和变化。必须根据确定的强度和硬度选择轧辊。

Rolled steel

The rolled steel is the key factor to select the roll. Its deformation resistance varies with the chemical of the billet. It is mainly manifested in the load and change of deformation in each rolling stage. The roll must be selected according to the determined strength and hardness.