轧辊生产商优选商家

轧辊在制作和运用前的预备工序中会发生剩余应力和热应力。运用时又进一步遭到了各种周期应力的效果,包含有曲折、改变、剪力、接触应力和热应力等。

Residual stresses and thermal stresses will occur in the preparatory process before making and applying rolls. When applied, it is further affected by various cyclic stresses, including twists, changes, shear forces, contact stresses and thermal stresses.

由于轧制过程是连续的过程，因此操作人员需要不断检测轧辊状况，使生产出来的产品满足用户对更严格的公差和表面质量的要求。

As the rolling process is a continuous process, the operator needs to continuously detect the roll status to meet the more stringent tolerance and surface quality requirements of the products produced.

线材轧机拥有粗轧机架和与小型型材轧机类似的中间机架。与两线轧制的小型型材轧机相比，这些轧机一般被设计成可以进行高达4线的同时轧制的切分轧制。然而，目前的发展趋势是采用单线的高速轧制。

The wire mill has a roughing mill stand and an intermediate rack similar to a ***all section mill. Compared with the two section rolling mill, these mills are generally designed for rolling up to 4 lines at the same time. However, the current development trend is single line high-speed rolling.