冷拉采购推荐“本信息长期有效”

冷床是中小型棒材车间不可缺少的辅助设备之一。它的功能是将轧机轧制后经飞剪剪切成倍尺长度的棒材, 输送并卸到冷床齿条上冷却, 使其温度由900℃降至100 ～ 300℃。

The cooling bed is one of the auxiliary equipment in the ***all bar workshop indispensable. It is the function of the bar rolling mill after double length flying shear, conveying and discharging to the cooling bed rack, the temperature 900 DEG C to 100~300 C.

冷床是冶金轧钢行业对轧制产品（螺纹钢、园钢、钢管等）有效进行冷却的工作台面。冷床由机械传动系统、水冷却系统、冷床工作台面、固定支架等方面组成。冷床主要有拔齿式冷床、齿条步进式冷床、拨爪式冷床、运载链式冷床、滚盘式冷床等。

The cooling bed is metallurgical industry of rolled products (steel, steel, steel and other garden) effectively cooling the work surface. The cooling bed by mechanical tran***ission system, water cooling system, cooling bed table, etc. of fixed bracket. The main bed tooth pulling type cooling bed, rack step type cooling bed, poking claw type cooling bed, carrier chain cooling bed, rolling disc cooling bed etc.

轧件在冷床冷却过程中由于冷却水不能均匀分布在型钢表面，头部冷却速度较快，弯曲，形成浴盆状，使腹板上的积水不能流出，导致上表面收缩率明显大于型钢下表面，产生上弯。

为消除不均匀变形，首先应该使2辊压下量足够大，满足型钢塑变要求。消除型钢原有变形，达到统一的变形的目的。

Rolling in bed cooling process due to the cooling water can not be uniformly distributed on the surface of steel, the head of the fast cooling rate, the first bend forming tub shaped, make web water can not flow, resulting in the surface shrinkage rate was significantly higher than that of the steel surface, due to bending.

In order to eliminate the uneven deformation, first of all, the 2 roller should be large enough to meet the requirement of the type of steel plastic change. The original deformation of the steel has reached the goal of uniform deformation.

潜行装置有两种形式：一种是杠杆式，另一种是滑块式。带潜行装置的拉钢式冷床很大优点足冷床床面利用率可达60%，可以自由地储存轧件，机动性能较好。

There are two forms of stealth device: one is lever type, the other is slider type. The biggest advantage of the pull steel cooling bed with stealth device is that the utilization rate of the cold bed can reach 60%, so that the rolling parts can be stored freely and the maneuverability is better.